欧兰科技 (Demo Site)-产品指南-激光器和激光光谱测量系统-可调谐激光器-PT403波长可调谐皮秒激光器-各种激光器，光谱测量，材料应力和形变分析,CCD相机, 光学传感器，精密位移台，PIV，PLIF等- Powered By SiteEngine

特色和应用

特色

Tuning range: 210 – 2300 nm
Motorized hands-free tuning
High pulse energy at 1 kHz rates
Diode pumped solid state design
Narrow linewidth < 9 cm⁻¹
Remote control via keypad
PC control
Optional streak camera triggering pulse with < 10 ps rms jitter
Turn-key operation
Air cooled – external water supply is not required
Low maintenance costs

应用

Time resolved fluorescence, pump-probe spectroscopy
Laser-induced fluorescence
Infrared spectroscopy
Nonlinear spectroscopy: surface-SH, Z-scan
Other spectroscopic and nonlinear optics applications

BENEFITS

Better long term stability (compared with layout where laser and OPO are in different units)
Higher safety – all beams are in the box
Shorter installation time
Almost twice smaller footprint

产品描述

PT403 series laser systems integrate a picosecond 1 KHz repetition rate DPSS pump laser and optical parametric generator into a single housing. New picosecond tunable wavelength laser system provide from 210 to 2300 nm from the one box.

Unlike other solutions in the market, offering laser and OPO in different units, new approach features pump laser and OPO integrated into one unit. That delivers almost twice smaller footprint, shorter installation, better stability and other substantial benefits for user.

All-in one-box solution features all components placed into one compact housing. It means better overall stability because all potential causes for misalignment between separate units of pump laser and optical parametric generator are eliminated.

To ensure reliability industry and market tested solutions were employed during the build-up of PT403.

Pump laser is based on industry “gold standard” diode pumped Ekspla PL2210 series picosecond mode-locked laser. Improved output parameters and reduced maintenance costs are achieved by employing diode-pumped-only technology.

Optical parametric generator is based on PGx03 picosecond optical parametric amplifier systems. Fully automatized and microprocessor based control system ensures hands free precise wavelength tuning.

PT403 was built without sacrificing any parameters or reliability. The optical design is optimized to produce low divergence beams with moderate linewidth (typically < 9 cm⁻¹) at approximately 15 – 20 ps pulse duration. Featuring 1 KHz repetition rate PT403 tuneable laser is versatile cost-efficient tool for scientists researching various kind of disciplines like time resolved fluorescence, pump-probe spectroscopy, laser-induced fluorescence, Infrared spectroscopy and other aplications.

For customer convenience the system have PC interface module with USB interface, remote control through Windows DLL function calls. This options allow easy control of system settings.

产品设计

The units can be divided into several functional parts:

1. 1 kHz repetition rate DPSS pump laser,

2. Optical parametric generator (OPG),

3. Electronic control unit.

PT403 series laser systems integrate a picosecond 1 kHz repetition rate DPSS pump laser and optical parametric generator into a single housing. As pump laser is used PL2210 series diode-pumped, air-cooled, mode-locked Nd:YAG laser. Picosecond tunable wavelength laser system provide from 210 to 2300 nm from the single optical unit.

PT403 tunable picosecond laser unit

性能指标

Model	PT403	PT403-SH
OPA SPECIFICATIONS ¹⁾
Output wavelength tuning range
SH	–	210 – 409 nm
Signal	410 – 709 nm
Idler	710 – 2300 nm
Output pulse energy ²⁾
SH ³⁾	–	15 µJ
Signal ⁴⁾	80 µJ
Idler ⁵⁾	25 µJ
Pulse repetition rate	1000 Hz
Linewidth	<9 cm^-1	<12 cm^-1
Typical pulse duration ⁵⁾	~ 15 ps
Scanning step
SH	–	0.05 nm
Signal	0.1 nm
Idler	1 nm
Typical beam size ⁷⁾	~ 2 mm
Beam divergence ⁸⁾	< 2 mrad
Beam pointing stability	≤ 100 μrad rms
Beam polarization
SH	–	horizontal
Signal	horizontal
Idler	vertical
Optical pulse jitter
Internal triggering regime ⁹⁾	< 50 ps (StDev) in respect to TRIG1 OUT pulse
External triggering regime	~ 3 ns (StDev) in respect to SYNC IN pulse
TRIG1 OUT pulse delay ¹⁰⁾	-400 ... 150 ns
OPERATING REQUIREMENTS
Room temperature	22 ± 2 °C
Relative humidity	20 – 80% (non-condensing)
Power requirements	100 – 240 V single phase, 47 – 63 Hz
Power consumption	< 0.6 kW
Water service	air cooled
Cleanness of the room	not worse than ISO Class 9

Due to continuous improvement, all specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 450 nm for PT403 units for basic system without options.
Pulse energies are specified at selected wavelengths. See typical tuning curves for pulse energies at other wavelengths.
Measured at 260 nm.
Measured at 450 nm.
Measured at 1000 nm.
Estimated assuming 30 ps at 1064 nm pump pulse. Pulse duration varies depending on wavelength and pump energy.
Beam diameter at the 1/e² level. Can vary depending on the wavelength.
Beam divergence measured at FWHM.
< 10 ps jitter is provided with PRETRIG option.

Note: Laser must be connected to the mains electricity all the time. If there will be no mains electricity for longer that 1 hour then laser (system) needs warm up for a few hours before switching on.

选项

OPTION SF

Energy increasing in 300 – 409 nm range by sum-frequency generation. > 20 µJ @ 340 nm. Pulse energies are ~ 10 % lower in comparison to the system without SF option. See table below for pulse energy specifications:

Model ¹⁾	PT403	PT403-SH
SH ²⁾	–	> 13 µJ
Signal ³⁾	> 70 µJ
Idler ⁴⁾	> 22 µJ

Due to continuous improvement, all specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture.
Measured at 260 nm.
Measured at 450 nm.
Measured at 1000 nm.