燃烧流体测量设备分站

北京欧兰科技发展有限公司

 



THz Accesories

THz Spectroscopy Accessories and Components
Download
datasheet
  • THz emitter/detector mounting stages
  • Power supplies
  • Preamplifiers
  • THz spectroscopy kits
Emitter (or detector) mounted on its stage

THz Emitter/Detector Mounting Stage

Separately from THz emitter and detector EKSPLA provides convenient mounting stage compatible with both devices. It contains lens, mounted on adjustable XY holder, compact stage for shifting lens along optical axis and rail, on which both: lens and emitter/detector are mounted.

This helps with pump beam guiding to the gap between electrodes located on photoconductive antenna, as well as adjusting beam diameter on active surface. Convenient fixing screws allow fast mounting and removing each part of this simple setup.

 

SPECIFICATIONS

Parameter Value
Beam height 105 mm
X, Y axis travel range 3 mm
Z axis travel range 13 mm
Lens diameter 25.4 mm
Lens focal diameter 50 mm
Lens anti-reflection coating AR/AR at selected wavelength (standard: 800/1030/1064 nm)

ORDERING INFORMATION

Description Model Notes
THz emitter/detector mounting stage MNT Includes pump beam focusing lens on XYZ stage

Bias Power Supply for THz Emitter

FEATURES OF BIAS POWER SUPPLY TMS-100 FOR THZ EMITTER

  • Low noise
  • DC or squarewave output (needs external TTL input)
  • Cable for connection to THz emitter included
 

SPECIFICATIONS

Parameter Value
Square-wave modulation frequency 10 Hz - 100 kHz
Output voltage 30-70 V (adjustable)
Max current 1 mA
Output socket BNC
Mains 100/220 VAC, 50/60 Hz
Dimensions (WxLxH) 130x190x39 mm

ORDERING INFORMATION

Description Model Notes
TMS-100 bias power supply TMS-100 30-70 V DC or square-wave output

Preamplifier for THz detector

SPECIFICATIONS

Parameter Value
Preamplifier type 1) current-voltage converter
Conversion coefficient > 106
Preamplifier head dimensions 60x12x15 mm
Power supply
Preamplifier power supply dimensions 155x65x80 mm
Preamplifier power supply output voltage + 15 V, -15 V
Preamplifier power supply line voltage 220 V or 110 V
  1. Preamplifier head is equipped with SMA connector matched with EKSPLA THz detector

ORDERING INFORMATION

Description Model Notes
Operational preamplifier PAM Current-voltage converter, 106 V/A gain, includes 15 V power supply

THz Spectroscopy Kit

EKSPLA “THz spectroscopy kit” contains all the components necessary to build THz-TDS system. The standard kit consists of photoconductive antenna THz emitter and detector, pump laser beam guiding optics, motorized delay line with controller, bias power supply TMS-100, THz beam guiding optics, sample holder and lock-in amplifier. All components are assembled on the baseplate of 60×80 cm dimensions.

Four standard configurations are available, optimized for transmission, reflection, imaging or pump-probe measurement. All can be easily interchanged and modified. Any other optional configuration can be ordered initially or as a future upgrade. THz spectroscopy kit is controlled by LabView™ based dedicated software.

 
 
基于博卡先锋SiteEngine构建
北京欧兰科技发展有限公司 版权所有 电子邮件:info@oplanchina.com,oplan@263.net
联系电话:010-62623871, 62616041,62612809 传真:010-59713638
地址:北京市海淀区上地十街1号辉煌国际中心1号楼1006室 邮政编码:100085   京ICP备07038319号-2
Processed in 0.043 second(s), 3 queries