燃烧流体测量设备分站

北京欧兰科技发展有限公司

 



Specifications 1)

Model NT341A NT341B NT342A NT342B NT342C
OPO
Wavelength range2)
Signal 410-680 nm 410-680 nm 410-709 nm 3) 410-709 nm 3)
Idler 740-2600 nm 740-2600 nm 710-2600 nm 710-2600 nm
SH generator (optional) - - 210-409 nm 210-409 nm
SH/SF generator (optional) - - 225-409 nm 225-409 nm
DUV generator (optional) - - 192-210 nm 192-210 nm
Output pulse energy
OPO 4) 20 mJ 40 mJ 15 mJ 30 mJ 50 mJ
SH generator (optional) 5) - - 2 mJ 4 mJ 6.5 mJ
SH/SF generator (optional) 6) - - 3 mJ 6 mJ 10 mJ
DUV generator (optional) 7) - - 0.3 mJ 0.6 mJ 1 mJ
Linewidth 10-350 cm-1 10-350 cm-1 <5 cm-1 8) <5 cm-1 8)
Wavelength set precision 9)
Signal (410-709 nm) 0.1 nm 0.1 nm 0.1 nm 0.1 nm
Idler (710-2600 nm) 1 nm 1 nm 1 nm 1 nm 1 nm
SH/SF/DUV beam (192-409 nm) - - 0.05 nm 0.05 nm 0.05 nm
Pulse duration 10) 3-5 ns
Typical beam diameter 11) 4 mm 5 mm 4 mm 5 mm 7 mm
Typical beam divergence 12) <6 mrad <6 mrad <2 mrad <2 mrad <2 mrad
Polarization
Signal beam horizontal horizontal horizontal horizontal horizontal
Idler beam horizontal horizontal vertical vertical vertical
SH/SF/DUV beam - - vertical vertical vertical
Pump laser 13)
Pump wavelength 355 nm
Max pump pulse energy 70 mJ 135 mJ 70 mJ 135 mJ 150 mJ
Pulse duration 4-6 ns
Beam quality "Hat-Top" in near field, without hot spots
Beam divergence <0.6 mrad
Pulse energy stability (Std.Dev) <3.5 %
Pulse repetition rate 10 or 20 Hz 14) 10 Hz
Physical characteristics
Unit size (WxHxL) 15) 446x260x820 mm
Power supply size (WxHxL) 330x585x490 mm
Umbilical length 2.5 m
Operating requirements
Water consumption (max 20 °C) 16) 6 l/min
Room temperature 15-30 °C
Relative humidity (noncondensing) 20-80 %
Mains voltage 208 or 240 VAC, single phase 50/60 Hz
Power consumption 17) 1.8/3.4 kVA

1) All specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 450 nm.
2) Hands-free tuning range is from 192 nm to 2600 nm.
3) Tuning range extension to 400-709 nm is optional.
4) Measured at 450 nm. See tuning curves for typical outputs at other wavelengths.
5) Measured at 260 nm. See tuning curves for typical outputs at other wavelengths.
6) Measured at 340 nm. SF generator is optimized for maximum output in 300‑409 nm range. See tuning curves for typical outputs at other wavelengths.
7) Measured at 200 nm.
8) Linewidth is <8 cm-1 for 210-409 nm range.
9) Represents wavelength change quantum for manual input from control pad. When wavelength is controlled from PC, the wavelength set precision is ~1 cm-1 in OPO range and ~2 cm-1 in SH/SFG range.
10) FWHM measured with photodiode featuring 1 ns rise time and 300 MHz bandwidth oscilloscope.
11) Beam diameter is measured at 450 nm at the FWHM level and can vary depending on the pump pulse energy.
12) Full angle measured at the FWHM level at 450 nm.
13) Separate output port for the 355 nm beam is standard. Outputs for 1064 nm and 532 nm beams are optional. Laser output will be optimised for OPO operation and specifications may vary with each unit we manufacture.
14) 30 Hz version is available. Inquire for pulse energy specifications.
15) Version with DUV generator has dimensions of 446×260×1020 mm (W×H×L).
16) At 10 Hz pulse repetition rate. Air cooled power supply is available.
17) At 10/20 Hz pulse repetition rate.

 

Requests for custom made products are welcome.

基于博卡先锋SiteEngine构建
北京欧兰科技发展有限公司 版权所有 电子邮件:info@oplanchina.com,oplan@263.net
联系电话:010-62623871, 62616041,62612809 传真:010-59713638
地址:北京市海淀区上地十街1号辉煌国际中心1号楼1006室 邮政编码:100085   京ICP备07038319号-2
Processed in 0.044 second(s), 3 queries