Specifications1)
| Model |
NT242A-50-SH/SFG |
| OPO |
| Wavelength range |
| Signal |
405-709 nm |
| Idler |
710-2600 nm |
| SH or SFG |
225-405 nm2) |
| Pulse energy 3) |
| OPO |
10 mJ |
| SH and SFG |
1.5 mJ at 260 nm and 340 nm |
| Pulse repetition rate 4) |
50 Hz |
| Pulse duration 5) |
3-6 ns |
| Linewidth6) |
<5 cm-1 |
| Scanning step |
| Signal |
0.1 nm |
| Idler |
1 nm |
| SH and SFG |
0.05 nm |
| Polarization |
| Signal |
horizontal |
| Idler |
vertical |
| SH and SFG |
vertical |
| Typical beam diameter 7) |
4 mm |
| Pump laser |
| Pump wavelength, nm 8) |
355/1064 nm |
| Max pump pulse energy, mJ 9) |
25/100 mJ |
| Pulse duration, ns 5) |
6-8 ns at 1064 nm |
| Physical characteristics |
| Unit size (WxHxL), mm |
446x260x820 mm |
| Power supply size (WxHxL), mm |
365x290x395 |
| Umbilical length, m |
2.5 m |
| Operating requirements |
| Cooling |
built-in chiller |
| Room temperature |
15-30 °C |
| Relative humidity (noncondensing) |
20-80 % |
| Mains voltage |
90-240 VAC, single phase 50/60 Hz |
| Power consumption |
< 1 kVA |
1) All specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 450 nm.
2) Tuning range of 210-405 nm is provided by SH/SFG option.
3) See tuning curves for typical outputs at other wavelengths.
4) Inquire for other pulse repetition rates.
5) FWHM measured with photodiode featuring 1 ns rise time and 300 MHz bandwidth oscilloscope.
6) Linewidth is <8 cm-1 for 210-405 nm range.
7) Beam diameter is measured at 450 nm at the FWHM level and can vary depending on the pump pulse energy.
8) Separate output port for the 3rd harmonics beam is standard. Output ports for other harmonics are optional.
9) The laser max pulse energy will be optimized for best OPO performance. The actual pump laser output can vary with each unit we manufacture. | 
公司新闻
