Specifications 1)
| Model |
SL230 |
SL231 |
SL232 |
SL233 |
SL234 |
| Max. pulse energy |
| at 1064 nm |
5 mJ |
20 mJ |
90 mJ |
150 mJ |
250 mJ |
| at 532 nm2) |
2 mJ |
8 mJ |
40 mJ |
70 mJ |
125 mJ |
| at 355 nm3) |
1.5 mJ |
5 mJ |
25 mJ |
40 mJ |
80 mJ |
| at 266 nm4) |
0.5 mJ |
2 mJ |
10 mJ |
15 mJ |
25 mJ |
| Pulse energy stability (Std. Dev), % 5) |
| at 1064 nm |
3 % |
2 % |
1.5 % |
| at 532 nm |
5 % |
3.5 % |
3 % |
| at 355 nm |
8 % |
5 % |
4 % |
| at 266 nm |
11 % |
8 % |
7 % |
| Pulse duration at 1064 nm (FWHM) 6) |
100 ± 15 ps |
| Pulse duration stability at 1064 nm (Std.Dev.)5) |
5 % |
| Repetition rate |
50 Hz |
10 Hz7) |
10 Hz8) |
| Linewidth |
≤ 0.1 cm-1 |
| Polarization ratio at 1064 nm |
linear,>1:100 |
| Optical pulse jitter9) |
0.2 ns rms |
| Beam profile |
Hat-Top10 |
| Beam divergence 11) |
<0.5 mrad |
| Beam height |
180 ± 5 mm |
| Contrast ratio at 1064 nm |
≥105:1 |
| Beam diameter12) |
~4 mm |
~5 mm |
~8 mm |
~10 mm |
~12 mm |
| Physical characteristics |
| Laser head size (WxHxL) |
452x260x810 mm |
452x260x1010 mm |
| Electric cabinet size (WxHxL) |
553x665x600 mm |
| Umbilical length |
2.5 m |
| Operating requirements |
| Water consumption (max 20 °C) |
<10 l/min |
| Room temperature |
18-24 °C |
| Relative humidity (non-condensing) |
10-80 % |
| Mains requirements 13) |
208 or 230 V AC, single phase, 50-60 Hz |
208 or 380 V AC, three phase, 50-60 Hz |
| Power consumption |
<2 kVA |
<1.5 kVA |
<2.5 kVA |
<3.5 kVA |
<3.5 kVA |
| Model |
SL230 |
SL231 |
SL232 |
SL233 |
SL234 |
1) All specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. Unless stated otherwise, all specifications are measured at 1064 nm.
2) For -SH option. Outputs are not simultaneous. Please inquire for pulse energies at other wavelengths.
3) For -TH option. Outputs are not simultaneous. Please inquire for pulse energies at other wavelengths.
4) For -FH option. Outputs are not simultaneous. Please inquire for pulse energies at other wavelengths.
5) Averaged from 300 pulses.
6) Inquire for optional pulse durations in 100-1000 ps range.
7) Models with pulse repetition rates up to 50 Hz are available.
8) Models with pulse repetition rates up to 20 Hz are available.
9) In external triggering mode with two separate triggering pulses for flashlamps and Q-switch. Low jitter sync pulse available for user equipment triggering.
10) Improved Gaussian fit profile is available on request.
11) Full angle measured at the 1/e2 point@ 1064 nm.
12) Beam diameter is measured @ 1064 nm at the 1/e2 point.
13) Three phase 208 or 380 VAC mains are required for 20 or 50 Hz versions. |
公司新闻
